Blog & Resources

Expert guides, technical comparisons and application insights for aluminum products

Latest Articles

9 articles

guide11 min read

How to Choose the Right Aluminum Sheet Thickness: Engineering Guide for Buyers

Choosing the wrong aluminum sheet thickness wastes money—too thick adds unnecessary weight and cost, too thin risks structural failure. This engineering guide shows you how to select the optimal thickness for truck bodies, fuel tanks, trailers, architectural cladding and marine applications, with real load calculations and cost comparisons.

Engineering & Sales Team
Read More
comparison9 min read

5052 vs 3003 Aluminum Sheet: Strength, Formability and Applications

5052 and 3003 are two popular aluminum sheet alloys for general fabrication, but 5052 offers significantly higher strength and better corrosion resistance. This guide compares their properties and helps you choose the right alloy for tanks, truck bodies, roofing and other applications.

Materials Engineering Team
Read More
guide10 min read

Aluminum Solar Panel Mounting Systems: Complete Installation Guide

Aluminum extrusions are the backbone of solar panel mounting systems. This guide explains how to choose the right aluminum alloy and profile for rooftop and ground-mount solar installations, with practical recommendations for rail sizing, corrosion protection and long-term performance.

Solar Engineering Team
Read More
technical11 min read

Anodizing vs Powder Coating for Aluminum Profiles: Complete Comparison

Anodizing and powder coating are the two most common surface finishes for aluminum profiles, but they work in completely different ways and have different strengths. This guide compares cost, durability, appearance, corrosion protection and environmental impact.

Surface Finishing Team
Read More
guide8 min read

Marine Aluminum Alloy Selection Guide: 5052 vs 5083 vs 6061

Choosing the right aluminum alloy for marine applications can be confusing. This guide compares 5052, 5083 and 6061 aluminum for boat hulls, decks and fittings, with practical recommendations based on vessel type and operating environment.

Marine Engineering Team
Read More
technical14 min read

Aluminum Welding Guide: TIG vs MIG for 5xxx and 6xxx Alloys

Welding aluminum requires different techniques than welding steel. This comprehensive guide covers TIG and MIG welding processes, filler alloy selection, joint design, and how to avoid common problems like porosity, hot cracking and distortion.

Welding Engineering Team
Read More
comparison12 min read

6061 vs 7075 Aluminum: Strength, Cost and Applications Compared

6061 and 7075 are two of the most popular aluminum alloys, but they serve very different purposes. This detailed comparison explains when to use each alloy based on strength requirements, cost constraints and application environment.

Materials Engineering Team
Read More
Email
sales@alucnfactory.com
Phone
+86 158 6163 1952
WeChat
+86 158 6163 1952
WhatsApp
+86 158 6163 1952